-
Concrete Testing
- Concrete test
- Includes measurement of slump, air temperatures on site, casting, curing and compressive testing of 3 samples; reporting
- Compressive strength reporting
- Flexural beams
- Set of three (CSA A23.1 A23.2 3C, 8C)
- Concrete test
-
On-Site Soil Testing
Compaction, in-place density testing (ASTM D6938)
-
Grout Testing
- Grout test
- Includes travel to and from site, casting, curing and compressive testing of 6 cubes; reporting
- VICAT testing
- Block fill testing (pin wheel testing)
- Compressive strength reporting
- Grout test
-
In-Lab Soil Testing
- Washed grain size analysis (ASTM D1140, ASTM C136, CSA A23.2 2A, 5A)
- Fines content wash only
- Washed grain size analysis with Hydrometer (ASTM D1140, ASTM D422)
- Laboratory compaction test
- Standard proctor (ASTM D698)
- Modified proctor (ASTM 1557)
- Liquid and plastic limits (ASTM D4318)
- Specific gravity (ASTM D854-98)
- Soil resistivity (ASTm G57)
- Bulk relative density
- Coarse aggregate (ASTM C127, CSA A23.2 6A, 12A)
- Fine aggregate (ASTM C128)
- Percentage flat and elongated particles (ASTM D4791-10, CSA A23.2 13A)
- Percentage fractured particles (ASTM D5821-13)
- Sand equivalent (ASTM D2419-14)
- Soundness (magnesium sulphate)
- Coarse aggregate (ASTM C88)
- Fine aggregate (ASTM C88)
- Organic impurities (ASTM C40, CSA A23.2 7A)
- Marshall Mix compliance (ASTM D1559, D2726, D2041, D3203, D6307, D136)
- Micro deval (CSA A23.2 23A, 29A, ASTM 6928, 7428)
- Clay lumps in natural aggregate (CSA A23.2 3A)
- Low density granular material (CSA A23.2 4A)
-
Asphalt Testing
- Marshall Mix compliance (ASTM D1559, D2726, D2041, D3203, D6307, D136)
- Marshall properties only (ASTM D1559, D2726, D2041)
- AC content and gradation (ASTM D6307, D2041)
- Percent compaction – core (ASTM D2726)
- Percent air voids – core (ASTM D2726, D3203)
- Core thickness
-
Shotcrete
Monitoring test panels, inspection of structural shotcrete application, and associated reporting according to the American Concrete Institute and the American Shotcrete Association
-
Concrete Coring
Coring of maximum 75mm diameter and 250 mm length core
-
Utility Locating
Completion of underground utility locating using Ground Penetrating Radar and electromagnetic equipment
-
Additional Testing
- Rental of slope inclinometer/settlement monitors
- Rental of Dynamic Cone Penetrometer
- Rental of blast monitor
- Rental of power hand auger
- Rental of MASW equipment
- Rental of Benkelman beam
- Rental of Schmidt hammer
- Rental of downhole seismic gear
- Pile Driving Analyzer
- Thermal Integrity Profiler
- Surface flatness testing
